Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX918W - Europe - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

NORYL GTX™ 918W resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits high heat resistance, excellent chemical resistance, and high melt flow. NORYL GTX918W resin may be an excellent candidate for automotive under-the-hood and electrical applications requiring the retention of properties while under thermal load.

UL Yellow Card Link E45329-236572

Processing/Physical Characteristics	Value	Unit	Test Standard
ISO Data
Melt volume-flow rate, MVR	5	cm³/10min	ISO 1133
Temperature	280	°C	-
Load	1.2	kg	-
Density of melt	924	kg/m³	-
Thermal conductivity of melt	0.21	W/(m K)	-
Spec. heat capacity of melt	1920	J/(kg K)	-
Ejection temperature	200	°C	-

Mechanical properties	Value	Unit	Test Standard
ISO Data
Tensile Modulus	2400	MPa	ISO 527
Yield stress	60	MPa	ISO 527
Yield strain	4.5	%	ISO 527
Stress at break	55	MPa	ISO 527
Strain at break	30	%	ISO 527
Flexural modulus	2200	MPa	ISO 178
Charpy notched impact strength, +23°C	20	kJ/m²	ISO 179/1eA
Charpy notched impact strength, -30°C	10	kJ/m²	ISO 179/1eA
Izod notched impact strength, +23°C, 4mm	20	kJ/m²	ISO 180/1A
Izod notched impact strength, -30°C, 4mm	10	kJ/m²	ISO 180/1A
Ball indentation hardness	95	MPa	ISO 2039-1

Thermal properties	Value	Unit	Test Standard
ISO Data
Vicat softening temperature, A	245	°C	ISO 306
Vicat softening temperature, B	190	°C	ISO 306
Vicat softening temperature, 120°C/h 50N	195	°C	ISO 306
Coeff. of linear therm. expansion, parallel	80	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion, normal	80	E-6/K	ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
Thickness tested	1.5	mm	-
Thermal Conductivity	0.25	W/(m K)	DIN 52616

Other properties	Value	Unit	Test Standard
Water absorption	4.2	%	Sim. to ISO 62
Humidity absorption	1.34	%	Sim. to ISO 62
Density	1100	kg/m³	ISO 1183

Processing Recommendation Injection Molding	Value	Unit	Test Standard
Pre-drying - Temperature	100 - 120	°C	-
Pre-drying - Time	2 - 3	h	-
Processing humidity	≤0.07	%	-
Melt temperature	280 - 310	°C	-
Mold temperature	80 - 120	°C	-
Feed temperature	60 - 80	°C	-
Zone 1	260 - 280	°C	-
Zone 2	270 - 290	°C	-
Zone 3	280 - 300	°C	-

Diagrams

Characteristics

Processing

Injection Molding

Applications

Automotive

Regional Availability

Europe

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.